Home > Aruba Access Points > AP-135 Access Points

Aruba AP-135 Description

The AP-135 indoor 802.11n access point (AP) maximizes performance for mobile devices in extremely high-density Wi-Fi environments and ensure strong threat protection using integrated MACSec security.

This multifunctional AP delivers wire-like performance at data rates up to 450 Mbps per radio. Taking advantage of 802.11n technology, the AP-135 employs three spatial streams to deliver 50% more throughput and support 50% more mobile devices in high-density environments compared to previous-generation APs.

MACSec authentication and encryption on Ethernet ports enable secure AP deployment by interoperating with the MACSec capability on Aruba Mobility Access Switches and other wiring closet devices.

The AP-135 features dual 10/100/1000BASE-T Ethernet interfaces and operate from standard 802.3af and 802.3at power-over-Ethernet (PoE) sources. The secondary Ethernet interface (active only when supplying 802.3at PoE or DC power to the access point) enables secure authorized backhaul for wired network-attached devices.

Working with Aruba's line of centralized Mobility Controllers, the AP-135 delivers secure, high-speed network services that move users to a "wireless where possible, wired where necessary" network access model. The network can then be rightsized by eliminating unused Ethernet switch ports and thereby reducing operating costs.

The key to ensuring wire-like performance and reliability is Aruba's unique Adaptive Radio Management and spectrum analysis capabilities, which manage the 2.4-GHz and 5-GHz radio bands to deliver maximum client performance while mitigating any RF interference.

The multifunction AP-135 can be configured through the Mobility Controller to provide WLAN access with part-time air monitoring for wireless IPS and spectrum analysis. They can be configured as dedicated air monitors within the campus WLAN or can be remotely located. They can enable wireless mesh networking for high performance network backhaul where wired cabling is not available.

Main Specifications
Product Description Aruba AP 135 - wireless access point
Device Type Wireless access point
Form Factor External - indoor
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Frequency Band 2.4 GHz, 5 GHz
Power Over Ethernet (PoE) Supported PoE
Dimensions (WxDxH) 6.7 in x 6.7 in x 1.8 in
Weight 1.7 lbs
Manufacturer Warranty Limited lifetime warranty

General
Device Type Wireless access point
Ruggedized Design Indoor
Width 6.7 in
Depth 6.7 in
Height 1.8 in
Weight 1.7 lbs

Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 450 Mbps
Line Coding Format CCK, 64 QAM, BPSK, QPSK, 16 QAM, OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Spread Spectrum Method OFDM, DSSS
Frequency Band 2.4 GHz, 5 GHz
Features Auto-sensing per device, auto-uplink (auto MDI/MDI-X), MIMO technology, wall mountable
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az

Antenna
Antenna Internal integrated
Antenna Qty 6

Expansion / Connectivity
Interfaces 2 x 1000Base-T - RJ-45
1 x management - RJ-45

Miscellaneous
Compliant Standards UL, VCCI, NOM, CCC, MIC, UL 2043, FCC, KCC, ANATEL

Power
Power Over Ethernet (PoE) Supported PoE
Power Consumption Operational 15 Watt

Manufacturer Warranty
Service & Support Limited lifetime warranty
Service & Support Details Limited warranty - lifetime

Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 122 °F
Humidity Range Operating 5 - 95%